|
|
|
National Stock Number:
5365-01-145-7704
Federal Supply Class:
5365
National Item Identification Number:
011457704
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2640-372X3 PIECE 12 | 96169 | ELECTRIC BOAT CORPORATION | | 845-2050921 PIECE 12 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| APERTURE DIAMETER | 2.752 INCHES MINIMUM AND 2.754 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.375 INCHES NOMINAL | | BOLT HOLE QUANTITY | 8 | | HOLE DIAMETER | 0.218 INCHES NOMINAL | | OUTSIDE DIAMETER | 4.149 INCHES MINIMUM AND 4.154 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY R-405 OR NICKEL ALLOY 400 | | SPECIAL FEATURES | COUNTERSUNK HOLES AT 0.375 IN. DIA | | STYLE DESIGNATOR | CIRCULAR |
|
|