|
|
|
National Stock Number:
5365-01-145-7914
Federal Supply Class:
5365
National Item Identification Number:
011457914
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 10087075 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 13029798 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13029798 | 1A228 | ABSTON MACHINE SHOP, INC. | | 13029798 | 26772 | WEGO PRECISION MACHINE, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 100.0 MILLIMETERS NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 89.8 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 89.8 MILLIMETERS NOMINAL | | HOLE DIAMETER | 10.275 MILLIMETERS MINIMUM AND 10.452 MILLIMETERS MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 7.0 MILLIMETERS NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 7.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 22.2 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 22.2 MILLIMETERS NOMINAL | | OVERALL LENGTH | 112.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 112.0 MILLIMETERS NOMINAL | | MATERIAL | ALUMINUM ALLOY 2024 | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|