|
|
|
National Stock Number:
5365-01-146-3776
Federal Supply Class:
5365
National Item Identification Number:
011463776
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 181815-2 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| INSIDE DIAMETER | 2.220 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-22296 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 2.359 INCHES MINIMUM AND 2.364 INCHES MAXIMUM | | OVERALL THICKNESS | 0.169 INCHES MINIMUM AND 0.171 INCHES MAXIMUM | | SPECIAL FEATURES | 0.050 IN. RADIUS ON LEFT OUTSIDE CORNER |
|
|