5365-01-147-0084 SPACER,SLEEVE Index 5365-01-147-0088 SPACER,PLATE

National Stock Number:
5365-01-147-0087

Federal Supply Class:
5365

National Item Identification Number:
011470087

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
709374CL261J4P3PARADIGM MANCHESTER INC.
709374CL2677445RTX CORPORATION
709374CL2688240NIELSEN TOOL AND DIE CO
709374CL2698500AGC ACQUISITION LLC
709374CL269D030METAL PRODUCTS CORP


Techincal Specification:
BOLT CIRCLE DIAMETER10.200 INCHES NOMINAL
BOLT HOLE QUANTITY3
FSC APPLICATION DATABEARING,SCAVENGE PUMP
LARGEST BOLT HOLE DIAMETER0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 8740
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE CORNER RADIUS0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
SPECIAL FEATURESARC SHAPED; 4.780 IN. INSIDE RADIUS; 5.400 IN. OUTSIDE RADIUS
SMALLEST BOLT HOLE DIAMETER0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM


Click here to Register for Free 30-day Trial