|
|
|
National Stock Number:
5365-01-147-1042
Federal Supply Class:
5365
National Item Identification Number:
011471042
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 343390-2 | 96214 | RAYTHEON COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 6 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.140 INCHES MINIMUM AND 2.160 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.890 INCHES MINIMUM AND 1.910 INCHES MAXIMUM | | LARGEST BOLT HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | OVERALL LENGTH | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM | | OVERALL WIDTH | 2.787 INCHES MINIMUM AND 2.807 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SMALLEST BOLT HOLE DIAMETER | 0.262 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | SPECIAL FEATURES | LARGEST HOLES LOCATED WITHIN SMALLER HOLE PATTERN | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|