|
|
|
National Stock Number:
5365-01-153-9590
Federal Supply Class:
5365
National Item Identification Number:
011539590
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 49688-01-46R01 ITEM NO 10 | 96169 | ELECTRIC BOAT CORPORATION | | 600-4594485 ITEM NO 10 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.562 INCHES NOMINAL | | LAMINATION QUANTITY | 190 | | OUTSIDE CORNER RADIUS | 0.440 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.310 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 2.440 INCHES NOMINAL | | OVERALL WIDTH | 0.940 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | TWO HOLES 0.562 IN. DIA,1.250 IN. DISTANCE FROM EDGE WITH BEVEL CORNER,TO CENTERLINES OF HOLES,ONE HOLE THRU BEARING FACE AND ONE HOLE THRU THE THK THE ENTIRE DISTANCE OF THE WIDTH,EACH HOLE 0.120 IN. DISTANCE FROM EDGE |
|
|