|
|
|
National Stock Number:
5365-01-155-0111
Federal Supply Class:
5365
National Item Identification Number:
011550111
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12298878 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12298878 | 20418 | DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING |
|
Techincal Specification:
| FEATURES PROVIDED | NONSEPARABLE | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.190 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.190 INCHES NOMINAL | | OVERALL LENGTH | 2.160 INCHES NOMINAL | | OVERALL THICKNESS | 0.030 INCHES NOMINAL | | OVERALL WIDTH | 0.760 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AASTM A366 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1009 OR STEEL COMP 1020 OR STEEL COMP 1025 | | SPECIAL FEATURES | HAS TWO SLOTS ALONG ONE SIDE OF OVERALL LENGTH; EACH SLOT HAS NOMINAL WIDTH OF 0.350 IN. | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-C-490 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE ZINC |
|
|