|
|
|
National Stock Number:
5365-01-172-3744
Federal Supply Class:
5365
National Item Identification Number:
011723744
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 754-2-36099-000 | K2523 | EATON LIMITED |
|
Techincal Specification:
| APERTURE DIAMETER | 70.60 MILLIMETERS MINIMUM AND 70.87 MILLIMETERS MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 58.7 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 60.76 MILLIMETERS NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 5.5 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS1449.S25 NATIONAL SPEC 1ST MATERIAL RESPONSE OR BS1449.S12 NATIONAL SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 321 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 7.0 MILLIMETERS NOMINAL | | OVERALL LENGTH | 78.0 MILLIMETERS NOMINAL |
|
|