5365-01-173-7958 SPACER,PLATE Index 5365-01-173-7960 SPACER,PLATE

National Stock Number:
5365-01-173-7959

Federal Supply Class:
5365

National Item Identification Number:
011737959

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
12396124930L3HARRIS TECHNOLOGIES, INC


Techincal Specification:
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.000 INCHES NOMINAL
HOLE DIAMETER0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
OVERALL LENGTH1.625 INCHES NOMINAL
OVERALL WIDTH0.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 6061
SPECIAL FEATURESBOLT HOLES LOCATED 0.250 IN. AND 1.250 IN. FROM ONE END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGPS20-102,TY 1,FSCM 24930 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCHROMATE


Click here to Register for Free 30-day Trial