|
|
|
National Stock Number:
5365-01-174-0908
Federal Supply Class:
5365
National Item Identification Number:
011740908
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| CA21126-1C | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | GS540N1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.488 INCHES MINIMUM AND 0.598 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | LAMINATION QUANTITY | 2 | | LAMINATION THICKNESS | 0.0075 INCHES NOMINAL AND 0.0350 INCHES NOMINAL | | OVERALL LENGTH | 0.1173 INCHES MINIMUM AND 0.1177 INCHES MAXIMUM | | OVERALL WIDTH | 0.680 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|