|
|
|
National Stock Number:
5365-01-177-1873
Federal Supply Class:
5365
National Item Identification Number:
011771873
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 2763450-101 | 3H889 | PARKER-HANNIFIN CORPORATION | | 2763450-101 | 59211 | PARKER-HANNIFIN CORPORATION | | 2763450-101 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| INSIDE DIAMETER | 2.501 INCHES MINIMUM AND 2.503 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 3.100 INCHES NOMINAL | | OVERALL THICKNESS | 0.190 INCHES NOMINAL | | SPECIAL FEATURES | ONE END OUTSIDE CORNER CHAMFERED,0.130 IN. LG,45 DEG ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|