|
|
|
National Stock Number:
5365-01-178-6299
Federal Supply Class:
5365
National Item Identification Number:
011786299
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 518-2118725 PC 17 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 76623-05X2 PIECE 17 | 96169 | ELECTRIC BOAT CORPORATION | | MIL-S-22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| APERTURE DIAMETER | 5.375 INCHES MINIMUM AND 5.385 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 7.125 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.685 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1 CLASS | | OUTSIDE DIAMETER | 8.720 INCHES MINIMUM AND 8.780 INCHES MAXIMUM | | SPECIAL FEATURES | SPLIT ON CIRCUMFERENCE,180.0 DEGREES APART |
|
|