|
|
|
National Stock Number:
5365-01-181-9685
Federal Supply Class:
5365
National Item Identification Number:
011819685
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 3030M83P01 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | CRITICALITY CODE JUSTIFICATION | AGAV | | FEATURES PROVIDED | NONSEPARABLE | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 302 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.060 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.060 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.380 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.380 INCHES NOMINAL | | OVERALL LENGTH | 1.080 INCHES MINIMUM AND 1.160 INCHES MAXIMUM | | OVERALL WIDTH | 0.740 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
|
|