5365-01-193-2488 SPACER,SLEEVE Index 5365-01-193-2490 SPACER,SLEEVE

National Stock Number:
5365-01-193-2489

Federal Supply Class:
5365

National Item Identification Number:
011932489

Description:
SPACER,SLEEVE

Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).


Manufacturer Information:
LD152-0039-275043999THE BOEING COMPANY


Techincal Specification:
BODY INSIDE DIAMETER0.2560 INCHES MINIMUM AND 0.2610 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM
CORNER SHAPEROUND LEFT FLANGE BODY CORNER
CORNER SHAPEROUND RIGHT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
LEFT FLANGE WIDTH0.0620 INCHES NOMINAL
LEFT FLANGE OUTSIDE DIAMETER0.7300 INCHES MINIMUM AND 0.7350 INCHES MAXIMUM
OVERALL LENGTH2.7450 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
RIGHT FLANGE OUTSIDE DIAMETER0.7300 INCHES MINIMUM AND 0.7350 INCHES MAXIMUM
RIGHT FLANGE WIDTH0.0620 INCHES NOMINAL
SPECIAL FEATURESFLANGES ARE 0.1560 IN. FROM EACH END
STYLE DESIGNATORSOLID, EXTERNAL FLANGES BOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-8585 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE AND CHROMATE ZINC OVERALL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us