|
|
|
National Stock Number:
5365-01-194-4936
Federal Supply Class:
5365
National Item Identification Number:
011944936
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 13204E2493 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 9 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.425 INCHES NOMINAL | | HOLE DIAMETER | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.800 INCHES NOMINAL | | OVERALL LENGTH | 39.000 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/7,H111 OR H112 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B221,H111 OR H112 ASSN STD 1ST MATERIAL RESPONSE OR QQ-A-200/8,T6 OR T6510 OR T6511 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8,T6 OR T651 FED SPEC 2ND MATERIAL RESPONSE OR ASTM B221,T6 OR T651 OR T6510 OR T6511 ASSN STD 2ND MATERIAL RESPONSE OR QQ-A-200/4,H111 OR H112 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/5,H111 OR H112 FED SPEC 3RD MATERIAL RESPONSE OR ASTM B221,ALLOY 5083,H111 OR H112 ASSN STD 3RD MATERIAL RESPONSE OR ASTM B221,ALLOY 5086,H111 OR H112 ASSN STD 3RD MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5456 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY | | SPECIAL FEATURES | COLOR GREEN | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PLASTIC |
|
|