5365-01-195-4948 SPACER,PLATE Index 4030-01-195-4950 CLAMP,WIRE ROPE,SADDLED

National Stock Number:
5365-01-195-4949

Federal Supply Class:
5365

National Item Identification Number:
011954949

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
12340099-119207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
5365PL08090759009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
558455334623AM GENERAL LLC
559380034623AM GENERAL LLC


Techincal Specification:
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B209 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 6061
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH6.090 INCHES MINIMUM AND 6.150 INCHES MAXIMUM
OVERALL WIDTH3.100 INCHES MINIMUM AND 3.160 INCHES MAXIMUM
SPECIAL FEATURESBLACK ANODIZE ONLY; SPACER IS 6.12IN LONG; 3.13IN WIDE; WITH 2EA SLOTS .440IN WIDE .44IN FROM EACH END; EACH SLOT IS 2.83IN INTO WIDTH; SLOTS ARE 4.80 FROM OUTSIDE EDGE OF FIRST SLOT TO INSIDE EDGE OF SECOND SLOT ALONG THE LENGTH; SPACER IS .125IN THICK.
SLOT QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTPAINT


Click here to Register for Free 30-day Trial