|
|
|
National Stock Number:
5365-01-195-9040
Federal Supply Class:
5365
National Item Identification Number:
011959040
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.320 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.585 INCHES MINIMUM AND 4.615 INCHES MAXIMUM | | HOLE DIAMETER | 0.656 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.800 INCHES NOMINAL | | OVERALL LENGTH | 6.200 INCHES NOMINAL | | OVERALL WIDTH | 2.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | JD-1020,75160 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1020 | | SPECIAL FEATURES | SEMICIRCULAR CUT-OUT SPACED MIDWAY ON EDGE WHICH LOCATES BOLT HOLES,SEMICIRCULAR CUT-OUT 1.240 IN. RADIUS CENTERED 0.040 IN. OUTSIDE OF EDGE |
|
|