|
|
|
National Stock Number:
5365-01-195-9708
Federal Supply Class:
5365
National Item Identification Number:
011959708
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 2122704-7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5365PL0893168 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| INSIDE DIAMETER | 0.509 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.630 INCHES NOMINAL | | OVERALL THICKNESS | 0.056 INCHES MINIMUM AND 0.058 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-17091,TYPE 1-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | SPECIAL FEATURES | DIAGONAL CUT 45.0 DEG AND 0.010 IN. MIN AND 0.041 IN. MAX WIDE THROUGH WALL ON ONE SIDE |
|
|