|
|
|
National Stock Number:
5365-01-197-3499
Federal Supply Class:
5365
National Item Identification Number:
011973499
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 14037861 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 14037861 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| BOLT CIRCLE DIAMETER | 3.100 INCHES NOMINAL | | HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 | | PROPRIETARY CHARACTERISTICS | PACS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GM 4435-M CODE A FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE |
|
|