|
|
|
National Stock Number:
5365-01-226-9539
Federal Supply Class:
5365
National Item Identification Number:
012269539
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 436060 | 3B150 | RAYTHEON COMPANY | | 436060 | 49956 | RAYTHEON COMPANY | | 436060 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.745 INCHES MINIMUM AND 2.755 INCHES MAXIMUM | | HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.380 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.380 INCHES NOMINAL | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | OVERALL WIDTH | 3.055 INCHES MINIMUM AND 3.065 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1018 | | SPECIAL FEATURES | HOLES ARE THREADED AT BOTH ENDS,0.250-20 UNC-2B,0.750 IN. DP 3 THD HOLES PERPENDICULAR TO THRU HOLES,0.250-20 UNC-2B,0.750 IN. DP | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | CADMIUM |
|
|