|
|
|
National Stock Number:
5365-01-228-3316
Federal Supply Class:
5365
National Item Identification Number:
012283316
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 114C2595-3 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 5365PL0960857 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.231 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | OVERALL LENGTH | 1.160 INCHES MINIMUM AND 1.200 INCHES MAXIMUM | | OVERALL WIDTH | 0.740 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 304 OR STEEL COMP 304L | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|