|
|
|
National Stock Number:
5365-01-231-3886
Federal Supply Class:
5365
National Item Identification Number:
012313886
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 85200709 | 55070 | GOODRICH | | 85200709 | K0131 | GOODRICH LIMITED | | 85200709 | K4358 | SAFRAN ELECTRICAL & POWER UK LTD | | 85200709 | U0J60 | ONTIC ENGINEERING & MANUFACTURING UK LIMITED |
|
Techincal Specification:
| APERTURE DIAMETER | 0.420 INCHES NOMINAL | | HOLE DIAMETER | 0.156 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 440F OR STEEL COMP 303 OR STEEL COMP 303CU OR STEEL COMP 303SE OR STEEL UNS S34720 OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL UNS S34723 OR STEEL COMP 303 PLUS X OR STEEL COMP 304 OR STEEL COMP 304H OR STEEL COMP 304L OR STEEL COMP 304N OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 309S-CB OR STEEL COMP 310 OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316F OR STEEL COMP 316H OR STEEL COMP 316L OR STEEL COMP 316N OR STEEL COMP 317 OR STEEL COMP 317L OR STEEL COMP 321 OR STEEL COMP 321H OR STEEL COMP 322 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 329 OR STEEL COMP 347 OR STEEL COMP 347H OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.120 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.1575 INCHES NOMINAL | | OVERALL LENGTH | 1.440 INCHES NOMINAL | | OVERALL WIDTH | 0.580 INCHES NOMINAL | | SPECIAL FEATURES | OPTIONAL MATERIAL STEEL COMP 303S | | STYLE DESIGNATOR | NON-CIRCULAR W/BEVELED CORNERS |
|
|