|
|
|
National Stock Number:
5365-01-238-8566
Federal Supply Class:
5365
National Item Identification Number:
012388566
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1D14530H03 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 1D14530H03 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE LENGTH | 2.840 INCHES NOMINAL | | APERTURE WIDTH | 0.670 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.590 INCHES NOMINAL | | HOLE DIAMETER | 0.211 INCHES MINIMUM AND 0.217 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.250 INCHES NOMINAL | | OVERALL WIDTH | 2.080 INCHES NOMINAL | | SPECIAL FEATURES | 2 CENTER HOLES 0.192 IN. MIN 0.198 IN. MAX DIA; RECTANGULAR GROOVE 1.214 IN. WIDE,3.384 IN. LG,0.108 IN. MIN 0.113 IN. MAX DEEP AROUND THE APERTURE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|