|
|
|
National Stock Number:
5365-01-276-5221
Federal Supply Class:
5365
National Item Identification Number:
012765221
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A112170-2003 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| OVERALL LENGTH | 1.400 INCHES MINIMUM AND 1.460 INCHES MAXIMUM | | OVERALL WIDTH | 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T851 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | ONE EDGE ROUNDED FROM 0.250 IN. THICKNESS TO 0.040 IN. THICKNESS; SPACER HAS ONE BOLT HOLE LOCATED 0.650 IN. FROM CENTER OF BOLT HOLE TO ROUNDED EDGE AND 0.780 IN. FROM CENTER OF BOLT HOLE TO OTHER EDGE ALONG LENGTH; DIA. OF BOLT HOLE IS 0.312 IN. | | STYLE DESIGNATOR | RECTANGULAR |
|
|