|
|
|
National Stock Number:
5365-01-277-2694
Federal Supply Class:
5365
National Item Identification Number:
012772694
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A112171-2017 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY UNS R56400 | | SPECIAL FEATURES | SHAPE IRREGULAR; DIMENSIONS-0.800 IN. TOP WIDTH,1.000 IN. BOTTOM WIDTH,0.700 IN. RT LENGTH,AND 1.000 IN. LEFT LENGTH; TOP RT CORNER CUT OUT; THICKNESS 0.190 IN.,LEFT EDGE ROUNDED TO 0.040 IN. THICKNESS W/RADIUS OF 0.500; ONE BOLT HOLE W/0.343 IN. DIA. LOCATED 0.420 IN. FROM LEFT EDGE TO BOLT HOLE CENTER ALONG WIDTH,AND 0.420 IN. FROM EDGE TO BOLT HOLE CENTER ALONG LENGTH; LEFT SPACER PLATE |
|
|