5365-01-279-0020, SPACER,PLATE

National Stock Number:
5365-01-279-0020

Federal Supply Class:
5365

National Item Identification Number:
012790020

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

P815-1D	0B201	CLARK AND ASSOCIATES INC
P815-1D	81755	LOCKHEED MARTIN CORPORATION

Techincal Specification:

BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.890 INCHES MINIMUM AND 0.950 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
HOLE DIAMETER	0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
OVERALL LENGTH	1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM
OVERALL WIDTH	1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-25-/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SPECIAL FEATURES	TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 1.690 IN. MIN AND 1.750 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial