|
|
|
National Stock Number:
5365-01-284-7051
Federal Supply Class:
5365
National Item Identification Number:
012847051
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 3201-16127-20-2 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | LAMINATION THICKNESS | 0.032 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499 COMP 3,TYPE 1,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER | | OVERALL LENGTH | 0.705 INCHES MINIMUM AND 0.735 INCHES MAXIMUM | | OVERALL WIDTH | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | STYLE DESIGNATOR | RECTANGULAR |
|
|