|
|
|
National Stock Number:
5365-01-285-8914
Federal Supply Class:
5365
National Item Identification Number:
012858914
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 886333-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.300 INCHES NOMINAL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.071 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 631 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM | | OVERALL WIDTH | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | SPECIAL FEATURES | HOLES ARE COUNTERSUNK 0.124 IN. MIN 0.134 IN. MAX DIA BY 100.0 DEG | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|