5365-01-287-9218, SPACER,PLATE

National Stock Number:
5365-01-287-9218

Federal Supply Class:
5365

National Item Identification Number:
012879218

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

1529M97P01

07482

GENERAL ELECTRIC COMPANY

Techincal Specification:

APERTURE DIAMETER	0.843 INCHES MINIMUM AND 0.854 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.312 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.312 INCHES NOMINAL
HOLE DIAMETER	0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.244 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.244 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
OVERALL LENGTH	1.800 INCHES MINIMUM AND 1.840 INCHES MAXIMUM
OVERALL THICKNESS	0.294 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
OVERALL WIDTH	1.800 INCHES MINIMUM AND 1.840 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5645 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5646 ASSN STD 2ND MATERIAL RESPONSE
MATERIAL	STEEL COMP 321 OR STEEL COMP 347
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial