|
|
|
National Stock Number:
5365-01-293-5807
Federal Supply Class:
5365
National Item Identification Number:
012935807
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 717740108-009 | 04939 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.749 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | HOLE DIAMETER | 0.014 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.095 INCHES MINIMUM AND 1.155 INCHES MAXIMUM | | OVERALL LENGTH | 8.220 INCHES MINIMUM AND 8.280 INCHES MAXIMUM | | OVERALL WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/16 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SLOT LENGTH | 0.375 INCHES NOMINAL | | SLOT QUANTITY | 2 | | SLOT WIDTH | 0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SPECIAL FEATURES | SLOTS 0.750 FROM OUTSIDE EDGE TO SLOT CENTER AND 0.440 IN. FROM SLOT CENTER TO NEAREST EDGE SPACED 7.500 IN. APART; THREE INSERT,THREADED P/N KNKDL1032JT,CAGEC 29372 INCLUDED |
|
|