|
|
|
National Stock Number:
5365-01-295-3060
Federal Supply Class:
5365
National Item Identification Number:
012953060
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5187294-3 | 15090 | RAYTHEON COMPANY | | 5187294-3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5187294-3 | 97993 | GENERAL DYNAMICS DEFENSE SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS |
|
Techincal Specification:
| APERTURE LENGTH | 0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM | | APERTURE WIDTH | 0.309 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.956 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.994 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.1785 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.1595 INCHES NOMINAL | | OVERALL LENGTH | 1.313 INCHES NOMINAL | | OVERALL WIDTH | 1.313 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1,TEMPER O FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.060 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.060 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|