|
|
|
National Stock Number:
5365-01-296-5390
Federal Supply Class:
5365
National Item Identification Number:
012965390
Description:
SPACER,SLEEVE
Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).
|
Manufacturer Information:
| PB-42210-1 | 12190 | CURTISS-WRIGHT FLOW CONTROL CORPORATION |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.3770 INCHES MINIMUM AND 0.3780 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | FLANGE WIDTH | 0.3100 INCHES NOMINAL | | MATERIAL | STEEL COMP 1020 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.6200 INCHES NOMINAL | | SPECIAL FEATURES | SLEEVE HAS A RECTANGULAR SHAPED FLANGE 1.1200 IN. WIDE,2.1200 IN. LONG,2 BOLT HOLES 0.2800 IN. DIA ON SAME CENTERLINE AS ID,0.3100 IN. OUTSIDE EDGE TO BOLT HOLE CENTER ALONG LENGTH |
|
|