|
|
|
National Stock Number:
5365-01-297-2790
Federal Supply Class:
5365
National Item Identification Number:
012972790
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5597788-1 | 38597 | LOCKHEED MARTIN CORPORATION | | 5597788-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5597788-2 | 38597 | LOCKHEED MARTIN CORPORATION | | 5597788-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5597788-2 | 5D286 | LOCKHEED MARTIN CORP LOCKHEED MARTIN LABORATORIES M/P 24 | | 5597788-1 | 5D286 | LOCKHEED MARTIN CORP LOCKHEED MARTIN LABORATORIES M/P 24 | | MIL-S-22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | LAMINATION QUANTITY | 63 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.440 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.440 INCHES NOMINAL | | OVERALL LENGTH | 1.880 INCHES NOMINAL | | OVERALL WIDTH | 1.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1,TEMPER H19 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,TEMPER H19 OR H39 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T3,T4,T81 OR T861 FED SPEC 3RD MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 2024 | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1 CLASS AND 1 COMPOSITION | | SPECIFICATION/STANDARD DATA | 81349-MIL-S-22499 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|