|
|
|
National Stock Number:
5365-01-298-0201
Federal Supply Class:
5365
National Item Identification Number:
012980201
Description:
SPACER,SLEEVE
Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).
|
Manufacturer Information:
| 5219475-1 | 38597 | LOCKHEED MARTIN CORPORATION | | 5219475-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5219475-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 2.0150 INCHES MINIMUM AND 2.0250 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 2.2500 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | OVERALL LENGTH | 7.3700 INCHES MINIMUM AND 7.3750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1020 OVERALL | | SPECIAL FEATURES | APPLY SOLID FILM LUBRICANT PER MIL-L-46010,3 HOLES THRU ONE WALL ONLY ALONG THE TOP OF THE LG,ONE IS 0.279 IN. MIN,0.289 IN. MAX IN CTR OF TOP ALONG THE LG,2 HOLES 0.560 IN. MIN,0.570 IN. MAX,ONE EACH END WITH A 2.875 IN. CTR | | STYLE DESIGNATOR | SOLID, PLAIN, NO OUTSIDE FLANGES | | SURFACE FINISH | 250.0 MICROINCHES OVERALL |
|
|