|
|
|
National Stock Number:
5365-01-300-8949
Federal Supply Class:
5365
National Item Identification Number:
013008949
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3601494-4 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.270 INCHES MINIMUM AND 2.300 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 2.660 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | LARGEST BOLT HOLE QUANTITY | 3 | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 3.010 INCHES MINIMUM AND 3.040 INCHES MAXIMUM | | SMALLEST BOLT HOLE DIAMETER | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 3 | | STYLE DESIGNATOR | CIRCULAR |
|
|