|
|
|
National Stock Number:
5365-01-303-2858
Federal Supply Class:
5365
National Item Identification Number:
013032858
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3237827-2 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 0.772 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5659 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 630 OR STEEL COMP XM-12 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | SLOT QUANTITY | 1 | | SLOT RADIUS | 0.025 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | SLOT DEPTH | 0.1295 INCHES NOMINAL | | SPECIAL FEATURES | MACHINED SURFACE ROUGHNESS 250 MICROINCHES | | STYLE DESIGNATOR | CIRCULAR W/SLOTS W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1,TY 2,TY 3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|