|
|
|
National Stock Number:
5365-01-303-7824
Federal Supply Class:
5365
National Item Identification Number:
013037824
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 708-175-001 | 26055 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.2187 INCHES MINIMUM AND 0.2192 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE | | MATERIAL | ALUMINUM ALLOY 2024 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.867 INCHES MINIMUM AND 1.872 INCHES MAXIMUM | | SLOT QUANTITY | 1 | | SLOT WIDTH | 0.144 INCHES NOMINAL | | SPECIAL FEATURES | 3 HOLES 0.128 IN. MIN 0.130 IN. MAX,1 HOLE 0.1406 IN. MIN 0.1411 IN. MAX,4 HOLES 0.100 IN. MIN 0.105 IN. MAX ELONGATED TO 0.196 IN. MIN 0.200 IN. MAX |
|
|