|
|
|
National Stock Number:
5365-01-304-4476
Federal Supply Class:
5365
National Item Identification Number:
013044476
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 60514192-1 | 34860 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.405 INCHES MINIMUM AND 0.412 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 0.798 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.987 INCHES MINIMUM AND 0.992 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | 0.172 IN. MIN 0.177 IN. MAX DIA,COUNTERSUNK 99 DEG MIN 101 DEG MAX | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
|
|