|
|
National Stock Number: 5365-01-305-3855
Federal Supply Class: 5365
National Item Identification Number: 013053855
Description: SPACER,PLATE
Detail: A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
6022726-1 | 3B150 | RAYTHEON COMPANY | 6022726-1 | 49956 | RAYTHEON COMPANY | 6022726-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | 6022726-1 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.380 INCHES NOMINAL | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.500 INCHES NOMINAL | LARGEST BOLT HOLE DIAMETER | 0.542 INCHES MINIMUM AND 0.557 INCHES MAXIMUM | LARGEST BOLT HOLE QUANTITY | 2 | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,TREMPER H32 FED SPEC SINGLE MATERIAL RESPONSE | MATERIAL | ALUMINUM ALLOY 5052 | PROPRIETARY CHARACTERISTICS | PACS | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.930 INCHES NOMINAL | OVERALL LENGTH | 4.360 INCHES NOMINAL | OVERALL WIDTH | 1.220 INCHES NOMINAL | SMALLEST BOLT HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.222 INCHES MAXIMUM | SMALLEST BOLT HOLE QUANTITY | 6 | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | SURFACE TREATMENT | CHROMATE |
|
|