|
|
|
National Stock Number:
5365-01-305-4355
Federal Supply Class:
5365
National Item Identification Number:
013054355
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 65850-05262-104 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 8.530 INCHES NOMINAL | | OVERALL WIDTH | 2.585 INCHES MINIMUM AND 2.595 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,TEMPER T7351 OR TEMPER T651 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/11,TEMPER T73511 OR TEMPER T6511 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | SLOT LENGTH | 0.500 INCHES NOMINAL | | SLOT QUANTITY | 2 | | SLOT WIDTH | 0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|