|
|
|
National Stock Number:
5365-01-305-9521
Federal Supply Class:
5365
National Item Identification Number:
013059521
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4537996-001 | S3465 | BAE SYSTEMS HAGGLUNDS AB | | 93726-991 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 93726-991 | 0BAT5 | U.S. DEFENSE SERVICES, INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 15.0 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 55.5 MILLIMETERS MINIMUM AND 56.5 MILLIMETERS MAXIMUM | | HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 9.3 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 1147-32 TY 2,CAGEC S3465 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 26.0 MILLIMETERS MINIMUM AND 28.0 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 110.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 30.0 MILLIMETERS NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FMV-A YB0103 CL ZN 20,CAGEC S3465 MFR REF 1ST TREATMENT RESPONSE AND YB 1202 TY C,CAGEC S3465 MFR REF 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | ZINC AND CHROMATE |
|
|