|
|
|
National Stock Number:
5365-01-306-0134
Federal Supply Class:
5365
National Item Identification Number:
013060134
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2342W15P001 | 97424 | AMETEK INC |
|
Techincal Specification:
| APERTURE DIAMETER | 1.408 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 1.610 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | LARGEST BOLT HOLE QUANTITY | 3 | | OUTSIDE DIAMETER | 1.903 INCHES MINIMUM AND 1.908 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR B7A2C2 CAGEC 97424 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SMALLEST BOLT HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 3 | | STYLE DESIGNATOR | CIRCULAR |
|
|