|
|
|
National Stock Number:
5365-01-307-8047
Federal Supply Class:
5365
National Item Identification Number:
013078047
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 0385061-1 | 24587 | RAYTHEON CO ESD LONG ISLAND DIV |
|
Techincal Specification:
| APERTURE WIDTH | 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM | | APERTURE LENGTH | 0.718 INCHES MINIMUM AND 0.724 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.153 INCHES MINIMUM AND 0.159 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.060 INCHES NOMINAL | | OVERALL LENGTH | 1.330 INCHES MINIMUM AND 1.350 INCHES MAXIMUM | | OVERALL WIDTH | 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.090 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.090 INCHES NOMINAL | | SPECIAL FEATURES | HAS 4 SMALLER ADDITIONAL BOLT HOLES W/0.0955-0.0965 IN. DIA,CSK 82 DEG TO 0.130-0.160 IN. DIA,2 EA. ARE LOCATED ALONG BOTH LENGTHS 0.315 IN. FROM OUTSIDE EDGE TO BOLT HOLE CENTER AND BOTH WIDTHS 0.178 IN. FROM OUTSIDE EDGE TO BOLT HOLE CENTER; APERTURE HAS 2 SLOTS OPPOSITE EACH OTHER ALONG LENGTH 0.172-0.174 IN. LONG AND 0.110 IN. DEEP | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|