|
|
|
National Stock Number:
5365-01-309-7096
Federal Supply Class:
5365
National Item Identification Number:
013097096
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 122-2422387 PC 180 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 122-2422391 PC 180 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 122-2422409 PIECE 180 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 122-2422417 PIECE 180 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | MIL-S-22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.000 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.375 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.688 INCHES MINIMUM AND 0.697 INCHES MAXIMUM | | LAMINATION QUANTITY | 84 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059,COND A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2 CLASS AND 3 COMPOSITION | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.620 INCHES NOMINAL | | OVERALL LENGTH | 4.060 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-S-22499 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|