|
|
|
National Stock Number:
5365-01-312-3807
Federal Supply Class:
5365
National Item Identification Number:
013123807
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3465117-1 | 24587 | RAYTHEON CO ESD LONG ISLAND DIV |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-46060 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.150 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.150 INCHES NOMINAL | | OVERALL LENGTH | 1.576 INCHES MINIMUM AND 1.584 INCHES MAXIMUM | | OVERALL THICKNESS | 0.6100 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM | | OVERALL WIDTH | 1.481 INCHES MINIMUM AND 1.489 INCHES MAXIMUM | | SPECIAL FEATURES | GR00VE THRU LENGTH OF FRONT FACE, 0.450 IN. DEEP BY 0.482 IN. WIDE;COUNTERBORED THRU HOLE IN TOP FACE, 0.152 IN. DIA, 0.280 IN. DIA C BORE BY 1.251 IN. DEEP, 1.130 IN. CENTER TO CENTER, 0.177 IN. FROM SIDES; TWO 0.112-40 UNC THREADED HOLES, 0.310 IN. DEEP,0.680 IN. C TO C, 0.402 IN. FROM SIDE FACE | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|