|
|
|
National Stock Number:
5365-01-326-8419
Federal Supply Class:
5365
National Item Identification Number:
013268419
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2042364-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OVERALL LENGTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | OVERALL WIDTH | 0.565 INCHES MINIMUM AND 0.575 INCHES MAXIMUM | | STYLE DESIGNATOR | RECTANGULAR | | SPECIAL FEATURES | THERE ARE TWO BOLT HOLES LOCATED THRU THE THICKNESS OF THE SPACER,THEY ARE 0.370-0.380 IN. FROM BOLT HOLE CENTER TO BOLT HOLE CENTER AND BOTH ARE 0.120-0.130 IN. FROM EDGE TO BOLT HOLE CENTERS ALONG LENGTH AND 0.120-0.130 IN. ALONG WIDTH; DIA OF BOLT HOLES IS 0.114-0.121 IN. |
|
|