5365-01-339-2118, SPACER,SLEEVE

National Stock Number:
5365-01-339-2118

Federal Supply Class:
5365

National Item Identification Number:
013392118

Description:
SPACER,SLEEVE

Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).

Manufacturer Information:

LD152-0040-3312

43999

THE BOEING COMPANY

Techincal Specification:

BODY INSIDE DIAMETER	0.2560 INCHES MINIMUM AND 0.2610 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.3600 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM
CORNER SHAPE	ROUND LEFT FLANGE BODY CORNER
CORNER SHAPE	ROUND RIGHT FLANGE BODY CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
LEFT FLANGE WIDTH	0.0620 INCHES NOMINAL
LEFT FLANGE OUTSIDE DIAMETER	0.8810 INCHES MINIMUM AND 0.8860 INCHES MAXIMUM
OVERALL LENGTH	3.3070 INCHES MINIMUM AND 3.3120 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/3,T3511 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
RIGHT FLANGE OUTSIDE DIAMETER	0.8810 INCHES MINIMUM AND 0.8860 INCHES MAXIMUM
RIGHT FLANGE WIDTH	0.0620 INCHES NOMINAL
SPECIAL FEATURES	FLANGES ARE 0.1560 IN. FROM EACH END
STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PLASTIC EPOXY AND PLASTIC POLYAMIDE OVERALL

Click here to Register for Free 30-day Trial