|
|
|
National Stock Number:
5365-01-357-9729
Federal Supply Class:
5365
National Item Identification Number:
013579729
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 41UTB(A)-C-84 | 52660 | JOSEPH T. RYERSON & SON, INC. | | 52887-1 | 1CZ81 | HAMPSHIRE SPECIALTY PRODUCTS INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 8.125 INCHES NOMINAL | | HOLE DIAMETER | 0.688 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.437 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 11.000 INCHES NOMINAL | | OVERALL WIDTH | 3.000 INCHES NOMINAL | | MATERIAL | PLASTIC ACETAL | | SPECIAL FEATURES | 0.500 INCH TO 1 INCH TAPER CUT; ENGINE MOUNTING BLOCKS REQUIRED PER BOAT ALT. 41UTB (A)-C-84 | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|