5365-01-465-4165, SHIM

8145-01-465-4164 SHIPPING AND STORAGE CONTAINER,M

National Stock Number:
5365-01-465-4165

Federal Supply Class:
5365

National Item Identification Number:
014654165

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

G557755-2	3B150	RAYTHEON COMPANY
G557755-2	49956	RAYTHEON COMPANY
G557755-2	54X10	RAYTHEON COMPANY

Techincal Specification:

APERTURE DIAMETER	1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.927 INCHES MINIMUM AND 1.947 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.927 INCHES MINIMUM AND 1.947 INCHES MAXIMUM
HOLE DIAMETER	1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	-24768/28 MIL SPEC ALL MATERIAL RESPONSES
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.125 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.125 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
OVERALL LENGTH	2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM
OVERALL THICKNESS	0.015 INCHES NOMINAL
OVERALL WIDTH	2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM
MATERIAL	PLASTIC
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial