|
|
|
National Stock Number:
5365-01-465-4175
Federal Supply Class:
5365
National Item Identification Number:
014654175
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| G557755-1 | 3B150 | RAYTHEON COMPANY | | G557755-1 | 49956 | RAYTHEON COMPANY | | G557755-1 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.927 INCHES MINIMUM AND 1.947 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.125 INCHES NOMINAL | | HOLE DIAMETER | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | -24768/28 MIL SPEC ALL MATERIAL RESPONSES | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.125 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.125 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | OVERALL LENGTH | 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM | | OVERALL THICKNESS | 0.010 INCHES NOMINAL | | OVERALL WIDTH | 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM | | MATERIAL | PLASTIC | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|